0-600-488406模块备件产品外观

0-600-488406
1.采用32位高速DSP芯片。
2. F0C场定向矢量控制，支持位置/速度闭环。
3.位置模式支持指令脉冲+方向或正交脉冲信号。
4.速度模式支持PWM占空比信号或4 ~20ma电流或0.6 ~3V电
压信号控制。
5.16位电子齿轮功能，1^ 65535 / 1 ~65535。
6.供电电压+20V ~50V。支持50~ 500W交流伺服电机。
7.支持485 (modbus 协议RTU模式)控制方式。可以设定驱动
器地址，简化控制系统。也可以直接通过PC机控制，并提供PC
机测试软件。
8.具有欠压，过压，堵转，过热保护。
9.提供隔离输出的到位信号、报警输出信号、编码器零点信号。

0-600-488406
1. adopt 32-bit high-speed DSP chip.
2. f0c field oriented vector control, supporting position / speed closed loop.
3. position mode supports command pulse + direction or quadrature pulse signal.
4. speed mode supports PWM duty cycle signal or 4 ~20ma current or 0.6 ~3v current
Pressure signal control.
5.16 bit electronic gear function, 1^ 65535 / 1 ~65535.
6. power supply voltage +20v ~50v. Support 50~ 500W AC servo motor.
7. support 485 (Modbus protocol RTU mode) control mode. Drive can be set
Device address to simplify the control system. It can also be directly controlled by PC and provided with PC
Machine test software.
8. it has undervoltage, overvoltage, locked rotor and overheating protection.
9. provide in place signal, alarm output signal and encoder zero signal for isolation output.