DS200DCFBG1BKC上有五个单独的电路。这些电路包括控制级电源电路、驱动电路、电机磁场电源电路以及交流和直流监测电路。驱动器上保险丝的诊断信息通过两个LED指示灯和一个霓虹灯指示灯呈现给用户。电路板中集成了三个保护保险丝，保护电流不受干扰。当使用卡上的五个测试点之一时，检查板中的电压水平很简单。为用户提供了许多可配置的设置，以适应特定工作的需要。电路板上的12个跳线和7个DIP开关可根据用户要求进行配置。
电路板和驱动器包含通用电气概述的应遵循的安装参数。这些指南将保护整个装置免受任何意外损坏。有关接线和安装板的完整指南，请参考设备的数据表和手册。Mark V系列的成员由其原始制造商通用电气提供技术支持。
The General Electric DS200DCFBG1BKC is a Mark V series power supply board. When installed in a drive, this board provides electricity to the enclosure fan as well as the system’s control level power. Of GE’s drive systems, this board is compatible with the DC2000, AC2000, FC2000, CB2000, and ME2000 series of drives. Nominally rated sourced inputs to the board can safely measure between 38 and 115VAC. Outputted frequencies generated by the card can measure anywhere from 0 and 500 kHz, depending on the inputted voltages.Five individual circuitries are found on DS200DCFBG1BKC. These include a control level supply circuit, a driver circuit, a motor field power circuit, and both an AC and DC monitoring circuit. Diagnostic information for the fuses on the drive is presented to the user via the two LED indicators and the one neon indicator. Three protective fuses are integrated into the board, protecting the currents from interruptions. Checking voltage levels in the board is simple when using one of the five test points found on the card. Users are provided a number of configurable settings to adjust to job specific needs. Twelve jumpers and seven DIP switches on the board can be configured to fit user requirements.
Boards and drives contain installation parameters outlined by General Electric that should be followed. These guidelines will protect the entire unit from any accidental damages. Please reference the device’s datasheet and manual for a complete guide to wiring and installing the board. Members of the Mark V series were provided technical support by their original manufacturer, General Electric.
客服1