•多支持15个仅侦听连接和1个输出连接
•作为主机，支持同步和冻结命令
•支持罗克韦尔的RSLogix 5000附加配置文件（AOP）
•多可扫描125个从机
•支持和扫描每个从机多122个字的输入数据和122个字的输出数据
•可以驻留在本地或远程CLX机箱中的任何插槽中。多可以有8个扫描仪
在机架中。
•支持所有标准PROFIBUS波特率（9600、19200、31.25k、45.45k、93.75k、，
187.5k、500k、1.5M、3M、6M、12M）
•支持以下DPV1主服务：
•1级：MSAC1\u读，MSAC2\u写
•2级：MSAC2\u启动、MSAC2\u读取、MSAC2\u写入、MSAC2\u空闲、，
MSAC2\u中止
•多可同时处理16个1级和16个2级命令
•使用DPV1时，多可以处理16个2级连接（到16个2级DPV1从机）
仅限2类通信
•可作为DPV0从机
•允许同时操作PROFIBUS主设备和从设备（高达12M）
•作为主机，多支持1984字节的输入数据和1968字节的输出
4个输入/输出页面中的数据
•作为主机，支持多达256个输入/输出模块的配置
DP Master and Slave Certified (with Profibus Firmware Revision 7.25) • Supports up to 15 listen-only connections plus 1 output connection • As a Master supports Sync and Freeze commands • Supports Rockwell’s RSLogix 5000 Add-on-Profile (AOP) • Can scan up to 125 slaves • Supports and scans up to 122 words of input data and 122 words of output data per slave • Can reside in any slot in the local or remote CLX chassis. You can have up to 8 scanners in a rack. • Supports all standard PROFIBUS baud rates (9600, 19200, 31.25k, 45.45k, 93.75k, 187.5k, 500k, 1.5M, 3M, 6M, 12M) • Supports the following DPV1 Master services: • Class 1: MSAC1_Read, MSAC2_Write • Class 2: MSAC2_Initiate, MSAC2_Read, MSAC2_Write, MSAC2_Idle, MSAC2_Abort • Can handle up to 16 Class 1 and 16 Class 2 commands simultaneously • Can handle up to 16 Class 2 connections (to 16 Class 2 DPV1 Slaves) when using DPV1 Class 2 Communication only • Can act as a DPV0 slave • Allows for simultaneous operation of PROFIBUS Master and Slave (up to 12M) • As a Master, supports a maximum of 1984 bytes of input data and 1968 bytes of output data with in 4 I/O pages • As a Master, supports configurations with up to 256 I/O modules
客服1