2BM100.9伺服控制器是一款高能效、低失真的AB类驱动器，专门用于驱动电力线路主电源(mains)，能够接受源自任何PLC调制解调器的信号。
2BM100.9包含一个运算放大器，能配置为均一增益(unity gain)跟随缓冲器，或另行用作提供*段的4点低通滤波器。输出段能够驱动高达2.0 A峰值电流，经隔离变压器或简单的线圈耦合至主电源。在输出电流为1.5 A时，输出电压确保在任意输入端以1.0 V或更低的摆幅摆动，确保在严格的环境中提供*的信噪比(SNR)。NCS5650在关闭模式仅消耗150 μA电流。可选用的电源包括单端6 V至12 V电源和双平衡±3.0 V至±6.0 V电源。
2BM100.9提供的全功率带宽特性，可在世界任何地区的PLC网络中工作，同时符合欧洲电工标准化委员会(CENELEC)等区域性PLC频率带宽规范标准。
这器件支持?40 °C至+125 °C的扩展结温度范围，采用带裸露热焊盘的紧凑型QFN封装，提供更高的热耗散性能，以及更强的热可靠性，帮助对成本敏感的设计人员进一步降低物料单(BOM)成本。
2BM100.9在1998年推出系列的模块化PLC，代表了当前PLC发展的*水平，是目前世界上*有竞争力的控制系统之一，Controllogix将顺序控制、过程控制、传动控制及运动控制、通讯、IO技术集成在一个平台上，可以为各种工业应用提供强有力的支持，适用于各种场合，*的特点是可以使用网络将其相互连接，各个控制站之间能够按照客户的要求进行信息的交换。
2bm100.9 servo controller is a class AB driver with high energy efficiency and low distortion, which is specially used to drive the main power supply (mains) of the power line and can accept signals from any PLC modem.
2bm100.9 contains an operational amplifier, which can be configured as a unity gain follow buffer or used as a 4-point low-pass filter to provide * segment. The output section can drive up to 2.0 a peak current, which is coupled to the main power supply through an isolation transformer or a simple coil. When the output current is 1.5 A, the output voltage can swing at any input terminal with a swing of 1.0 V or less, ensuring a signal-to-noise ratio (SNR) of * in a strict environment. Ncs5650 only consumes 150 in off mode μ A current. The optional power supply includes single ended 6 V to 12 V power supply and double balanced ± 3.0 V to ± 6.0 V power supply.
The full power bandwidth provided by 2bm100.9 can work in the PLC network in any region of the world, and comply with regional PLC frequency bandwidth standards such as CENELEC.
Does this device support? The extended junction temperature range from 40 ° C to +125 ° C and the compact QFN package with exposed thermal pads provide higher thermal dissipation performance and stronger thermal reliability, helping cost sensitive designers further reduce bill of materials (BOM) costs.
2bm100.9 launched a series of modular PLCs in 1998, which represents the * level of the current PLC development. It is one of the * competitive control systems in the world. ControlLogix integrates sequence control, process control, transmission control and motion control, communication and IO technologies on one platform, which can provide strong support for various industrial applications. It is suitable for various occasions. The * feature is that it can be connected with each other using the network, Each control station can exchange information according to the requirements of customers.
客服1